§ 36-643. Requirements for building coverage, setbacks and height.

(a)

Minimum tract area. No tract of land shall be transferred to the Planned Industrial District unless the tract measures at least ten acres in area or is contiguous to other land in the Planned Industrial District.

(b)

Minimum lot area. The minimum lot area is two acres.

(c)

Minimum building area. Each building shall have a gross floor area of not less than 10,000 square feet.

(d)

Maximum building coverage.

(1)

Lots of less than three acres: 30 percent.

(2)

Lots of three acres or more: 45 percent. They may be increased to 60 percent, if the total gross floor area on the lot is contained within a single building and all portions of any loading docks and berths are completely enclosed within the same single building.

(e)

Maximum floor area ratio. Maximum: FAR: 0.5. The FAR may be increased to 0.6 for buildings which qualify for 60 percent building coverage, as provided in section 36-643(d).

(f)

Setbacks.

Front Street	Side Street	Interior Side Yard	Rear Yard
50 feet*	50 feet*	20 feet*	20 feet*

 

*Or the building height, if greater.

(g)

Maximum building height. See article XI, division 2 of this chapter, Building Height Overlay District and appendix A of the city's official zoning map.

(Code 1970; Code 1992, § 850.17(4); Ord. No. 2016-05 , § 3, 5-3-2016)